EN
Quick Links
Product Introduction：
Product Overview：Shantui SE240LC-9 excavator is an outstanding medium-sized crawler excavator, which is suitable for a variety of complex working conditions and performs excellently especially in small-scale mining and earthwork operations.
Product Specification Parameters：The whole-machine working weight is approximately 24.5 tons. The standard bucket capacity is 1.2 cubic meters. The rated power of the engine can reach 128kW/2000rpm, possessing a powerful power output ability to meet the needs of different operation intensities.
Product Performance：It adopts advanced technologies and has good stability and controllability. Whether on flat ground or in complex sloping areas, it can move forward steadily. During excavation operations, it can show larger excavation heights and radii, and has a relatively high operation efficiency.
Product Advantages：
①Outstanding Overall Performance：
Advanced Hydraulic System：Shantui SE240LC-9 excavator is equipped with a world-class hydraulic system. This system has a high working pressure, which can provide sufficient power for each working component, ensuring powerful excavation movements. Meanwhile, the low pressure loss reduces energy waste, making the whole machine operate more efficiently and energy-saving, helping to reduce the operation cost.
Powerful Engine：It adopts a highly adaptable turbocharged engine. Its turbocharging technology can effectively increase the air intake under different working conditions, thereby enhancing the power output. Whether in high-altitude areas or heavy-duty excavation operations, it can stably provide strong power, ensuring the stable operation of the equipment without stalling due to insufficient power.
Sensitive Electronic Control System：The self-developed electronic control system has high sensitivity. The instructions sent by the operator through the control levers can be accurately and quickly executed, realizing the quick response of the excavator's movements. This not only makes the operation smoother but also enables precise control of the excavation angle and depth under complex working conditions, improving the operation quality and efficiency. Moreover, thanks to the optimization of this electronic control system, the equipment achieves lower fuel consumption, effectively saving the operation cost and having an economic advantage compared with similar equipment in small-scale mining operations.
Strong Adaptability to Working Conditions：It has excellent adaptability to various complex working condition environments. Whether on uneven, sloping areas or under harsh conditions such as hard soil, it can move forward powerfully and maintain good excavation performance. Its larger excavation height and radius further expand the operation range, enabling efficient operation in various excavation projects and improving the overall mining operation efficiency.
②Strengthened Working Device：
Structural Optimization and Reinforcement：The key parts of the structure have been comprehensively optimized. The boom, arm and other key stressed parts have been specifically strengthened through means such as increasing the structural strength and improving the connection methods, so that these parts can better withstand the huge forces during the excavation process, effectively avoiding structural deformation or damage caused by harsh working conditions and prolonging the service life of the equipment.
Improved Bucket Durability：The bottom plate, side plate and reinforcing plate of the bucket are made of high-strength and wear-resistant materials. These materials have the characteristics of high hardness and good wear resistance. In the excavation operations that frequently contact materials such as sand and ore, they can greatly reduce wear, maintain the integrity of the bucket and a good working state, reduce the frequency of bucket replacement and lower the use cost.
Flexible Configuration：It can easily combine various specifications of booms, arms and buckets. According to different operation scenarios, such as different requirements for excavation depth and material loading capacity, the corresponding specifications of components can be quickly replaced to achieve flexible configuration, thus accurately adapting to various working conditions and meeting the needs of diverse engineering tasks.
③High-end System Configuration：
High-performance Engine：Equipped with an internationally leading high-adaptability turbocharged engine, its advanced combustion technology ensures the full combustion of fuel, which not only improves the power output efficiency but also reduces exhaust emissions, meeting environmental protection requirements. Meanwhile, the engine has good heat dissipation performance and can maintain a stable working temperature during long-term continuous operation, ensuring reliable operation and being less prone to overheating failures.
High-quality Hydraulic Configuration：It adopts a world-class hydraulic configuration. The hydraulic components are all selected from internationally renowned brands, with reliable quality and stable performance. Its high-precision hydraulic control technology enables the precise adjustment of the working pressure. While ensuring the excavation strength, it minimizes the pressure loss, realizing the perfect match between the hydraulic system and the whole machine's working state and ensuring the smooth and efficient execution of each working movement.
Product Operation Guide：
Pre-start Inspection：Before starting Shantui SE240LC-9 excavator, it is necessary to check whether each instrument display is normal, check whether the levels of hydraulic oil, fuel, coolant, etc. are within the appropriate range, confirm that there are no obstacles in the surrounding environment to ensure the safe start of the equipment.
Operation Process：When operating Shantui SE240LC-9 excavator, according to the operation requirements, reasonably operate each control lever to control the movements of the boom, arm and bucket, and keep the movements smooth and continuous. Pay attention to controlling the excavation strength and speed to avoid equipment damage caused by excessive force. At the same time, flexibly adjust the excavation angle and depth according to different working conditions.
After Operation：After completing the operation, park Shantui SE240LC-9 excavator in a flat and safe place, lower the working device, turn off the engine, cut off the power supply, conduct a simple appearance cleaning of the equipment, and check for any abnormal conditions to prepare for the next use.
Frequently Asked Questions：
Question：What is the maintenance cycle of Shantui SE240LC-9 excavator?
Answer：It is generally recommended to conduct a routine maintenance every 250 working hours, such as replacing engine oil and filters, but it can be adjusted appropriately according to the actual working conditions.
Question：What are the requirements for fuel quality of this excavator?
Answer：It is recommended to use clean diesel that meets national standards to ensure the normal operation of the engine and avoid engine failures caused by poor fuel quality.
Question：How to contact the after-sales maintenance if the equipment breaks down?
Answer：You can call the official after-sales service hotline of Shantui, describe the failure situation in detail to the customer service staff, and the after-sales team will arrange maintenance personnel to contact you in time.
